Maintenance product recommendations
Keep your paving looking its best with our professional maintenance products. From specialized detergents to anti-efflorescence solutions and protective impregnations, you'll find everything you need to clean, protect and beautify.
Anti-Mold
Alkaline solution specially created to remove mold, moisture, tannin, algae and moss stains from mineral surfaces. It is used on paving stones, natural stone, concrete, marble or granite, restoring their cleanliness and original appearance.
Application method: The product is applied evenly to the desired surface using a brush or by spraying. It is left to act for a few hours, then rubbed with a plastic brush, and finally rinsed abundantly with water, preferably two or three times.
Covering: Up to 10 m² / 1L
Do not mix with other products. Avoid contact with eyes. Wear gloves. Strong oxidizing action.
Professional Alkaline Detergent
Concentrated, very powerful detergent designed to remove oil stains, smog, dust or rubber marks. It is ideal for effective cleaning of pavements, fences, concrete, natural stone, marble and granite.
Application method: The product is applied evenly to the desired surface, using a brush or sprayer. Leave to act for a few minutes, then rub with a plastic brush, remove the excess with a dry cloth and rinse thoroughly with water, two to three times.
Covering: 5–10 m² / 1L (stubborn stains) • 10–30 m² / 1L (general cleaning)
Do not mix with other detergents. Avoid eyes. Wear gloves.
Wet Effect Impregnating Agent
A protective and beautifying product that enhances the natural color and waterproofs the treated surface. It is applied to paving, stone, concrete, marble and granite to increase resistance to water, smog, frost and dirt.
Application method: The product is applied evenly to the clean and dry surface, using a brush, roller or sprayer. Leave to act for 15–20 minutes, then wipe off the excess with a dry cloth.
Covering: 10–30 m² / 1L
Do not mix with other products. Avoid eyes. Wear gloves.
Natural Effect Impregnating Agent
Invisible protective solution that preserves the natural appearance of the surface while providing effective waterproofing. It is suitable for paving, fences, steps and other vertical or horizontal concrete surfaces.
Application method: The product is applied evenly to the desired surface with a brush, roller or spray. Leave to act for 15–20 minutes, then remove the excess with a dry cloth.
Covering: 10–30 m² / 1L
Flammable, avoid contact with eyes, use gloves.
Anti-Efflorescence
Detergent specially designed to remove white efflorescence, cement or adhesive stains that appear on the surface of concrete. It is used on paving stones, fences, stone or other mineral surfaces, cleaning deeply without damaging the structure.
Application method: The product is applied evenly to the desired surface, using a brush or by spraying. Leave to act for a few minutes, then rub with a plastic brush and rinse thoroughly with water.
Covering: 4–8 m² / 1L
Do not apply to glossy marble. Avoid eyes. Wear gloves.
Rust
Product designed to clean rust stains on hard outdoor surfaces, with effective and fast action. It is applied to paving stones, stone, concrete, marble and granite, without compromising their finish.
Application method: The product is applied evenly to the desired surface, using a brush or sprayer. Leave to act for a few hours, then scrub with a plastic brush and rinse thoroughly with water.
Covering: 8–12 m² / 1L
Do not use on polished marble. Avoid eyes. Use gloves.
